Specifications
1,DC12V/DC24V LED Strip (Silicon tube with epoxy inside)
2, 60LEDs/meter
3,IP Protection: IP20,IP65,IP66,IP67,IP68
Preservation Type
A)Non-waterproof
B)Waterproof IP65 (Epoxy encapsulated)
C)Waterproof IP66 (Silicon tube)
D)Waterproof IP67 (Semi tube+epoxy coated)
E)Waterproof IP68 (Silicon tube with epoxy inside)
|
Model No. |
Voltage |
Color |
LED Type |
LED Qty/M |
Lumen/M |
Power |
PCB Width |
|
GW-SMD5050W60L-10MM
|
DC12V/DC24V |
White |
SMD5050 |
60leds |
1050 lm |
14.4W |
10mm |
|
GW-SMD5050WW60L-10MM
|
DC12V/DC24V |
Warm white |
SMD5050 |
60leds |
1000 lm |
14.4W |
10mm |
|
GW-SMD5050R60L-10MM
|
DC12V/DC24V |
Red |
SMD5050 |
60leds |
200-300 mcd |
14.4W |
10mm |
|
GW-SMD5050B60L-10MM
|
DC12V/DC24V |
Blue |
SMD5050 |
60leds |
200-300 mcd |
14.4W |
10mm |
|
GW-SMD5050G60L10MM
|
DC12V/DC24V |
Green |
SMD5050 |
60leds |
300-400 mcd |
14.4W |
10mm |
|
GW-SMD5050Y60L-10MM
|
DC12V/DC24V |
Yellow |
SMD5050 |
60leds |
500-700 mcd |
14.4W |
10mm |
|
GW-SMD5050P60L-10MM
|
DC12V/DC24V |
Purple |
SMD5050 |
60leds |
-------- |
14.4W |
10mm |
|
GW-SMD5050RGB60L10MM
|
DC12V/DC24V |
RGB |
SMD5050 |
60leds |
--------- |
14.4W |
10mm |
Typical Applications
● Edge-lighting of transparent or diffused materials.
● Path & Contour Marking.
● Emergency / rescue signs.
● To couple light into transparent or diffused glass .
● Widespread use in accessorial lights for indoors, medical, landscape,
● Architectural lighting, villa, restaurant, hotel, meeting room, show room, shop, counter and so on.
● General lighting, Task lighting, Household appliances, Architectural lighting, Decorative / pathway lighting, 
Safety Information
■ The SMD light ribbon itself and all its components may not be mechanically stressed. Assembly must not damage or destroy conducting paths on the circuit board.
■ Installation of LED light ribbon (with power supplies) needs to be comply with all applicable electrical and safety standards. Only professionals should be allowed to perform installations. Correct electrical polarity needs to be observed. Wrong polarity may destroy the ribbon.
■ Parallel connection is highly recommended as safe electrical operation mode.
■ Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the ribbon.
■ Please ensure that the power supply is of adequate power to operate the total load.
■ When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical insulated points between ribbon and mounting surface.
■ Please pay attention to standard ESD precautions when installing the ribbon.
■ Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
SUPER-ET COMPANY is a factory specialized in LED light products,LED Car light & LED Home light(such as LED Spot ligh,LED tube light,LED Strip light,LED down light,LED Track light,LED high bay light,LED Flood light,LED panel light.LED Global light,LED Plug light ect.
Welcome inquiry we can promise you good price with good quality !
Website: www.super-et.com
Email: super@super-et.com
